When cutting carbon steel with laser cutting machine, burrs will appear at the bottom of the cutting surface
1. Key issues. The focusing position of the laser is incorrect. This problem can be solved by adjusting the focus.
2. Laser output power. First, check whether the laser is normal. On the premise of confirming the normal operation of the laser, further check whether the output power of the laser matches the power required by the plate. If not, adjustment is required.
3. Cutting speed. Too slow cutting speed will also cause burrs at the bottom of the cutting surface. At this time, it is necessary to speed up the cutting speed.
4. Gas problem. The purity of the gas will also affect the cutting quality. When the purity of the gas is not enough, this problem will occur. It is necessary to replace the gas with higher purity for cutting.
5. Working time of carbon steel laser cutting machine. This problem may also occur when the machine has been operating continuously for more than a certain period of time. At this point, you need to restart your computer to try.
