What should I do if the fiber laser cutting machine encounters a failure during use. Even the best machine may break down in the process of use. Nobody can avoid this situation. Of course, don’t be too alarmed when encountering faults. Each fault has its own reason. Specific operators should carefully look for the reason and solutions when encountering these faults, Here are some common faults and solutions.
The first failure that may occur during the use of the fiber laser cutting machine is that there is some abnormal noise in the machine equipment, which is also possible in many other types of machines. There are many reasons for the abnormal noise. At this time, the first thing to do is to shut down the machine immediately and do not continue to let the machine run, otherwise some problems may occur. After turning off the machine, because the machine itself is a very precise product, the operator should not dismantle this thing casually, but should feed back these problems to the technical department in time, and ask the technical department to send a special person to check the machine and equipment. The abnormal noise may be caused by the loose parts in the machine and equipment, At this time, the technical maintenance department may check the condition inside the machine and equipment, tighten the loose parts again, and replace the parts that need to be replaced, so that the machine can operate normally again. The second problem that may occur during the operation is that the cutting accuracy decreases or the cutting surface looks irregular. This may be caused by a problem with the nozzle. You can stop the machine and check the condition of the nozzle. If the accuracy of the nozzle can no longer meet the requirements, then you can replace a nozzle at this time to meet the required accuracy.
Some faults and solutions that may be encountered during the operation of the fiber laser cutting machine are briefly introduced here. Some common faults can be solved by themselves, but if they are more complex faults, there is no way to solve them by themselves. At this time, do not go to repair without authorization, but hand over professional matters to professional after-sales departments, Vendors and manufacturers of machinery and equipment will provide customers with considerate after-sales service to help customers solve problems encountered in the process of use.
