What is the general process of fiber laser cutting machine? Due to some parts and precision inside the mechanical equipment, the working principle of cutting operation is relatively complex, so it is impossible to introduce its working principle in detail. The following is just a brief introduction to the general working process of this tool. I hope that the following introduction can make you have a deeper understanding of this machine, At the same time, we also hope that customers who want to buy this machine can contact the factory in time.
The working process of the fiber laser cutting machine is also very simple. When it is used, just press a button to produce the desired parts. It is very easy to say, but some of the working principles involved behind it are very complex. For example, if we want to make a salary increase or cut out a certain part, the first step is to design the drawing of the workpiece on the computer, input all the parameters of the corresponding workpiece into the drawing, and then the drawing of the workpiece will be made, of course, the drawing must be designed in the corresponding application software, After the design is completed, there is the second step. This step is to try to cut and process the designed drawings, directly connect the machine and the computer, and then press the button to start the trial run. The speed of the operation should not be too fast at this time, and there must be someone nearby to observe when running for a long time. If there are some abnormalities during the operation, At this time, the machine should be stopped immediately, and then the cause of the abnormal situation should be analyzed. It may be that the machine and equipment are faulty, or there may be some defects in the drawing design. Find out the causes and solve these problems, and then try to cut again. If a workpiece can be cut successfully, it means that the machine can work normally without problems in the drawing, Then mass production can be carried out immediately.
The basic process of the optical fiber laser cutting machine is briefly introduced here. This kind of machine equipment needs the help of numerical control programming software to achieve special functions. Therefore, the requirements for the operator’s programming are relatively high. It is not to say that the machine can be used immediately after getting it. The biggest feature of this machine is that it can adapt to some very complex programming and can cut very complex workpiece.
