When the laser cutting machine is working, it needs high temperature stability. This temperature is not the temperature of the external environment, but the internal temperature of the laser cutting machine (including the laser and cutting head). Laser cutting machine is a high-tech product invented under the premise of rapid industrial development, but many operators of operating equipment will find that the water temperature of the laser cutting machine sometimes rises too fast, and water plays a key role in the laser cutting machine. So, what is the main reason for the rise of the water temperature of the laser cutting machine?
What is the reason for the temperature rise of the laser cutting machine?
1. When the metal laser cutting machine is working, the ambient temperature is high.
2. The continuous working time of metal laser cutting machine is too long, so it should be properly closed and rested.
3. The water inlet pipe and outlet pipe of the water pump are too dirty, the water protection device is blocked, and the water flow is not smooth.
4. The working light intensity of metal laser cutting machine is too high.
5. The return of the cooling water outlet pipe is abnormal, resulting in poor water flow.
What is the reason for the rising water temperature of the laser cutting machine?
How to solve the problem of high water temperature of laser cutting machine?
In the working process of the laser cutting machine, a large amount of water is needed to cool the high temperature inside the laser tube to ensure the normal use and service life of the laser tube. However, when the laser cutting machine is used normally, the water in the cooling water tank is prone to high temperature, especially in summer, which will become hot in less than 2 hours. If it is not replaced in time, the power of the laser tube will be greatly reduced. Chuyu Laser teaches you how to deal with the headache of high water temperature of the laser cutting machine.
You can find another common bucket. Two double headed ones are required. When the bucket is filled with cold water, you can start to work. When the water temperature is high, take out the working water pump from the bucket with high water temperature and put it into another cold water bucket to continue working. When the water temperature in the bucket is high, the water in the other bucket has been basically cooled to cold water. Then put the water pump into the barrel, and the problem of high water temperature of the laser cutting machine can be solved without paying for repeated replacement. If you think it is troublesome and you need to stop and replace the water pump to affect production, you can purchase a special laser cooling water tank, a refrigerator with a compressor, which can cool the high-temperature water in operation to the set temperature.
With the improvement of laser power and the application of linear motor, laser cutting machine is developing rapidly. The increase of laser power means that not only thicker steel plates can be processed, but also the feed speed can be improved. There is no doubt about the importance of laser processing. As a powerful supplement to traditional machining methods, it solves some problems faced by traditional machining.
The above is the reason for the rise of the water temperature of the laser cutting machine, so the operator should also pay attention to the abnormal conditions during the subsequent operation. If the operator does not follow the correct operation method, the water temperature may rise rapidly, affecting the treatment progress.
