The maintenance method for the guide rails of engraving machines such as advertising engraving machines, woodworking engraving machines, and machining centers is as follows: it is required to clean the X, Y, and Z axis guide rail surfaces after each operation, clean all chips and dirt on the rails, and then check for scratches and damage on the guide rail surface. After cleaning, lubricating oil should be added to the guide rail to facilitate the next day’s operation.
Maintenance method for the track of the stone carving machine: Because the stone carving machine often requires water, the machine is relatively damp and the track must be maintained daily.
When maintaining, it is important to pay attention to using engine oil for the X, Y, and Z axis polished rods; The screw part must use high-speed butter; If the working environment temperature is too low in winter, parts such as screw, polished rod, square guide rail, or circular guide rail should be washed and cleaned with gasoline first, and then oil should be added. Otherwise, it will cause excessive resistance in the transmission part of the machine and cause problems such as misalignment of the machine.
