We all know that we need to buy a laser engraving machine is mainly to see how the performance of this laser engraving machine, then the performance of the laser engraving machine is determined by what? Laser engraving machine performance is mainly determined by the laser engraving machine engraving speed, engraving intensity, spot size and.
Laser engraving machine can improve the efficiency of engraving, so that the surface of the engraved place is smooth, round, quickly reduce the temperature of the non-metallic materials being engraved, reduce the deformation and internal stress of the engraved object; according to the different laser light source can be divided into CO2 non-metallic laser engraving machine and fiber optic metal engraving machine. co2 non-metallic laser engraving machine general domestic use of glass laser tube more, there are some high-end laser engraving machine The use of co2 metal radio frequency tube.
Engraving speed is the speed of laser engraving machine laser head movement, usually expressed in IPS (inches / second), high speed brings high productivity. Speed is also used to control the depth of cut. For a given laser intensity, the slower the speed, the greater the depth of cut or engraving. You can adjust the speed using the engraver’s panel, or you can use the computer’s print driver to do so. The adjustment is 1% in the range of 1% to 100%. The advanced motion control system of the Hummer allows you to engrave at high speed and still get super fine engraving quality.
Engraving intensity refers to the intensity of the laser shot from the laser engraver to the surface of the material. For a given engraving speed, the higher the intensity, the greater the depth of cut or engraving. You can adjust the intensity using the engraver panel or by using the computer’s print driver program. The adjustment is 1% in the range of 1% to 100%. The higher the intensity, the greater the equivalent speed. The deeper the depth of cut is also.
Engraving intensity is the intensity of the laser beam from the laser engraver onto the surface of the material. For a given engraving speed, the greater the intensity, the greater the depth of cut or engraving. You can adjust the intensity using the engraver panel or by using the computer’s print driver. The adjustment is 1% in the range of 1% to 100%. The higher the intensity, the greater the equivalent speed. The depth of cut is also deeper.
The beam spot size can be adjusted using lenses of different focal lengths. A lens with a small spot is used for high-resolution engraving and a lens with a large spot is used for lower resolution engraving, but for vector cutting it is the best choice. The new machine comes standard with a 2.0″ lens. Its spot size is in the middle, suitable for a variety of applications.
General laser engraving machine can engrave the following materials: wood products, Plexiglas, glass, stone, crystal, Corian, paper, dichroic board, leather, resin, acrylic, home textile fabric and other non-metallic materials.
