Use and maintenance skills of optical fiber laser cutting machine

The optical fiber laser cutting machine needs regular inspection and maintenance:

1. Check the steel belt frequently to ensure that it is tight. Otherwise, if there is a problem during operation, people may be injured and even killed. The steel belt looks like a small thing. If something goes wrong, it is still a bit serious.

2. Check the straightness of the track and the perpendicularity of the machine every six months, and timely maintain and debug in case of any abnormality. If this is not done, the cutting effect may not be good, and the error will increase, affecting the cutting quality. This is a top priority and must be done.

3. Use a vacuum cleaner once a week to remove the dust and dirt in the machine, and all electrical cabinets should be tightly closed to prevent dust.

4. All guide rails shall be cleaned frequently to remove dust and other sundries, to ensure that the normal rack of the equipment shall be wiped frequently, and lubricating oil shall be added to ensure lubrication without sundries. The guide rail shall be cleaned and lubricated frequently, and the motor shall also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately, and the quality of the cut products will be improved.

5. The double focus laser cutting head is a vulnerable item on the laser cutting machine, which is damaged due to long-term use.

If there is deformation or other forms, you should know that the laser cutting head has been damaged and should be replaced. Not replacing will affect the cutting quality and increase the cost. Some products may need to be processed again to reduce production efficiency.

Product added!
The product is already in the wishlist!

Shopping cart

close