Tlaser is a laser engraver designed as proof of concept of a new motion system, coreXY cantilever.
Check all the info at GitHub: https://github.com/FiCacador/Tlaser
Main features:
– CoreXY cantilever
– 5500mW blue laser
– 315mm x 205mm engraving area
– Linear guide rails
– Adjustable height at each corner
– 3D printed
Parts used:
– 5.5W 445NM blue laser module: http://s.click.aliexpress.com/e/bAbwR1Wg
– MGN Blocks and Rails: http://s.click.aliexpress.com/e/bKj8dYfI
– Nema 17 stepper motors: http://s.click.aliexpress.com/e/cpg92iXI
– Arduino Uno R3 /w CNC shield v3 and A4988 stepper drivers: http://s.click.aliexpress.com/e/b7E6Xk5a
– Mechanical Endstops: http://s.click.aliexpress.com/e/CIG3mQk
– Timing belt GT2 6mm: http://s.click.aliexpress.com/e/belvtmGu
– Belt drive Pulleys GT2: http://s.click.aliexpress.com/e/bSDqAZ5W
– GT2 pulleys: http://s.click.aliexpress.com/e/bPZGjS6G
– M3 round head hex bolts: http://s.click.aliexpress.com/e/cScWFTX6
– M3 socket head hex bolts http://s.click.aliexpress.com/e/b72TH5Nm
– M3 self tapping bolts: http://s.click.aliexpress.com/e/bZMmlnQu
– M3x50 bolts: http://s.click.aliexpress.com/e/t3QLC2k
– M3 hex nuts: http://s.click.aliexpress.com/e/nRG0NIC
Music:
– Eveningland – Lost Time: https://youtube.com/channel/UCi0uheSErbivC3_662UqL-w
Video edited on the open source software Kdenlive: https://kdenlive.org/
UCcJOz2YxsBrqFVKxQeYehZw
laser engraver
#Tlaser #CoreXY #cantilever #Printed #Laser #Engraver
