In summer, with the increase of temperature throughout the country, many mechanical equipment may generate heat in the use process, resulting in some minor failures. Therefore, in order to avoid the failure of the laser cutting machine in summer, attention should be paid to the maintenance and repair of the laser cutting machine to extend its service life.
Tips for daily maintenance of laser cutting machine in summer
Daily maintenance skills of laser cutting machine:
1. With the increase of summer temperature, the working pressure of the cooling system of the laser cutting machine increases. It is recommended to maintain the pressure of the cooler before reaching high temperatures. Equipment pressure varies from manufacturer to manufacturer. It is recommended to consult the equipment manufacturer for specific parameters before maintenance.
2. Before the machine works, make sure that the laser tube is full of circulating water. The quality and temperature of circulating water will directly affect the service life of the laser tube. Therefore, the circulating water must be replaced regularly and the water tank must be cleaned regularly. It is best to do this once a week.
3. There will be some mirrors and focusing lenses on the machine. The laser is reflected and focused through these lenses, and then emitted from the laser hair. The lens is easy to be stained with dust or other pollutants, which may cause laser loss or lens damage. Therefore, clean the lenses every day. be careful:
1. Wipe the lens gently to avoid damaging the surface coating;
2. Wipe with care to prevent falling;
3. When installing the focusing lens, please keep the concave side downward.
4. Due to the high temperature in summer, the deterioration rate of cooling water will also be accelerated. It is recommended that users of the laser cutting machine use distilled water or purified water, and regularly clean the scale, so as not to cause the scale installed on the laser tube to affect the laser power. Different types of laser cutting machines have different ways of cleaning scale, and they need to be operated under the guidance of the manufacturer.
5. Since the dust of the laser cutting machine is mainly metal powder, it is recommended to clean the dust in the electrical cabinet of the laser cutting machine and regularly check the working condition of the cooling fan.
Regular maintenance of the equipment can avoid some problems when using the laser cutting machine, extend the service life of some parts and equipment performance, and also improve the working efficiency of the equipment. Therefore, in addition to the maintenance of the laser cutting machine in summer, we should also carry out regular maintenance of the laser cutting machine.
