We all know that the laser engraving machine is currently a more common processing equipment in the advertising industry, used to process the logo signage efficiency is very obvious, different models of laser engraving machine requires different optical system configuration, laser engraving machine optical system including laser head, laser tube, reflector, focusing mirror, etc., which is divided into laser head and single, double, four laser head, laser tube and will be in accordance with the laser engraving machine needs Laser engraving machine need to carve and cut the material to match the laser tube power size, then the laser engraving machine optical system in the whole laser engraving machine to play what role? The following will be a brief introduction to the role of the laser engraving machine optical system and maintenance knowledge.
Laser head is divided into single, double, four laser head, to a flower, for example, single-headed laser head carving out of the goods only one flower, double-headed laser head carving out of 2 flowers, which greatly improves efficiency and saves time costs; laser tube will be configured according to the need to carve cutting materials with different power laser tube, laser tube power is divided into 60w / 80w / 100w /120w, etc.
The reflection mirror will chant our processing of soot pollution, the reflection rate will be reduced, which is not conducive to future laser processing. So we must ensure the cleanliness of the reflector, regular inspection of the reflector, if contaminated, we can use anhydrous ethanol to clean the lens, and then wipe the mirror surface with degreasing cotton; focusing lens must pay attention to the protection of the lens, because the contamination will affect the laser output, if accidentally contaminated, you can first remove the blowing tube and the protection sleeve, remove the lens and then use a blowing balloon to blow the focusing lens surface Then wipe the surface of the lens with skimmed cotton dipped in anhydrous ethanol.
