My Supercarver laser has an opening of 100mm, which stops me engraving onto anything larger than that. In this project I’m investigating what I can do to re-direct the laser to allow me to use materials of ANY SIZE Let me know what you think of this project in the comments, or feel free to […]
Last summer, I cashed in a savings bond and treated myself to a new bit of kit. A K40 Laser Engraver. In this project I’ll show you the machine and the steps needed to get it up and running as quickly as possible. The unit itself was bought from eBay and if you’re interested, you […]
Here’s a excellent way to make highly detailed ink stamps, using cheap materials from the hobby store and a low-cost laser engraver. The sheet I used is available from Hobbycraft in the UK and Hobby Lobby in the US. https://hobbycraft.co.uk/black-self_adhesive-foam-sheet-225-x-30cm/637214-1000 https://hobbylobby.com/Crafts-Hobbies/Basic-Crafts/Craft-Foam/Black-Self-Adhesive-Foam-Sheet—9%22-x-12%22/p/28642 Head over to https://tinkerneering.uk, where you’ll find a contact page if you want to […]
