Join us as we experiment with using Spray Paint and the Laser Cutter to create custom acid etched brass parts. The laser selectively burns away the spray paint to expose the brass for the etching acid bath to eat. We used the muriatic acid and hydrogen peroxide method to etch the brass, then assembled the […]
Here’s a quick video of a Boss HP-2436 Co2 laser engraving on stainless steel using a metal marking spray. Simply spray your material evenly, engrave, and wipe off the excess to enable your Co2 laser to easily engrave on metals with a dark black finish. You can buy metal marking spray products at the websites […]
Johnson Plastics Plus is proud to offer CerMark ULTRA laser marking spray and paste. CerMark ULTRA allows you to create contrasting laser marks on a variety of surfaces, including metal, glass, tile, brick, and more! This video gives you an introduction to the product line and shows you the product in action. For more information, […]
Tested contributor Bill Doran (aka Punished Props) is in our shop this week and experiments using our Universal Laser Systems laser cutter to make a quick paint mask for a helmet. This can be done with standard painter’s tape or a large sheet of masking tape, and we learn some lessons about masking complex curves. […]
