Because laser cutting machine has the advantages of high efficiency, good quality of finished products, flexible processing, etc., it has been increasingly favored by the sheet metal processing industry. However, when some customers use the laser cutting machine, there will be many burrs on the workpiece. Many people think that the quality of laser cutting […]
Burr refers to various sharp corners, burrs and other irregular metal parts at the transition of workpiece surface during laser cutting. Burr is one of the common phenomena in laser cutting, and it is also the two unsolved problems “generation and control of burr” in the research of metal cutting theory. Burrs directly affect the […]
First, check the straps regularly to ensure that they are tight. Otherwise, problems may occur in the operation. People may be injured. It can also lead to serious death. Secondly, check the straightness of the track and the perpendicularity of the machine every six months. In case of any abnormality, maintenance and commissioning shall be […]
Because the laser power density has a great influence on the cutting speed, the selection of lens focal length is an important issue. After the laser beam is focused, the spot size is proportional to the focal length of the lens. After the beam is focused by the short focal length lens, the spot size […]
In this Video Russ explains how to laser cut and engrave leather and hide for the best results. Wee to the 49th in our series of videos that aim to teach you how to use a laser cutter. Please Subscribe, leavements and let us know what topics you would like to see in future videos. […]
There are quite a few software tools available for Laser Engraving, so in this video, I havepiled the best ones, so you can hopefully find out which one is right for you. I start off with simple, easy-to-use software that is great for beginners, and go all the way up to professional-level tools. Thanks to […]
In this Video, Russ shows us the techniques he uses to laser cut a jigsaw puzzle. The files mentioned in the video can be downloaded from here: http://thinklaser/wp-content/uploads/2019/06/A4-puzzle-jig.dxf and http://thinklaser/wp-content/uploads/2019/06/A4-puzzle-template.dxf Wee to the 50th in our series of videos that aim to teach you how to use a laser cutter. Please Subscribe, leavements and let […]
