Co2 Laser engraver Double line troubleshooting. We are new to CO2 Lasers and we wanted to share our first issue with our Monport. on our third project we found that the laser started having a double line on the project. Please check out the process we took to solve this issue. If you are interested […]
Co2 Laser Alignment Key points: – mirrors 1 and 2 do not need to be centered – going into the laser head you want to be perfectly centered left to right -90 degree corners at every mirror and beam parallel to the rails is the goal – DO NOT skip third mirror alignment, this is […]
I’m demonstrating the mirror alignment procedure on a 50W ebay Chinese laser cutter. It doesn’t need to be difficult. Be methodical, follow the steps in order. If you feel you messed something up, go back a step or 2 and repeat from there. With practice you should eventually be able to perform an alignment in […]
Other(better) resources: Jarrod’s laser world: http://jarrodkinsey.org/ https://youtube.com/channel/UCP-cc5GJYLkQxRHPE8cyW8w Sam’s laser FAQ: https://repairfaq.org/sam/lasercc2.htm —————————————— Outro music by a friend of mine, check him out: intro music: bensound.com UCQ3KKU5-uaoLyKnGVzv1XNw co2 laser #Homemade #CO2 #Laser #Tube #Part
