During the use of the fiber laser cutting machine, special attention should be paid to many problems. For example, the system itself is excited by the laser, and some specific wavelengths in the laser will cause damage to human eyes. Therefore, when operating the machine and equipment, the eyes must be specially protected, so as to avoid the impact on the physical health of the direct operator. The material selection is also very important when using this kind of machine and equipment, because this kind of fund equipment cannot cut some materials, such as carbonic acid or acrylic acid materials, or it may cause some unexpected situations.
The fiber laser cutting machine can be used to cut some fiber materials or wood materials in the process of use. If you want to cut other types of materials, you should first call the after-sales service personnel. If the after-sales service personnel think that such materials cannot be cut, then do not use this machine to cut, otherwise it may cause accidents. In addition, it should be noted that this machine has some requirements for the thickness of the material when cutting. If the thickness of the material itself is relatively large, then it needs to choose a high-power cutting machine. If the thickness of the material is moderate, you can choose a general cutting machine to cut. In the process of using this machine, necessary maintenance should be carried out for the mechanical equipment, so as to prolong the service life of this machine. If maintenance is not carried out, some parts of the machine and equipment may be damaged, especially some more precise parts will be involved, which determine the service life of the machine. If good maintenance can be done, The service life of the fine components inside will be greatly extended, which can save the cost of using the machine.
The matters needing attention during the use of the fiber laser cutting machine are briefly introduced here. Of course, there are many other problems that need attention. It is suggested that the direct operator of the machine should read the operation manual of the machine in detail, and can only use the machine directly after learning the specific use and maintenance methods. If there is any problem after using the machine for a period of time, You can call the after-sales phone directly for help.
