The laser cutting machine is an important equipment for sheet metal processing, and the correct use of the laser cutting machine is also an important prerequisite to improve its service life. Therefore, after we purchase the machine, we must master the standard and normative machine operation process and methods, so as to reduce the failure rate and improve the service life. Now we will introduce the standard and normative operation process of the laser cutting machine:
Standard operation process of laser cutting machine
First of all, strictly follow the rules, follow the principles of starting and shutting down the laser cutting machine, and do not force it to be closed or opened;
Secondly, employees shall not operate the machine without training. They can only operate the machine after complete training;
Third, during the working process of the laser cutting machine, outsiders shall not approach the console and console, and the core operation must be completed by professional personnel;
Fourth, adjust the light path of the machine tool, lower and release the cutting head in the follow-up method, and force to follow the accurate control process to ensure the safety of the machine;
Fifth, every time you start the machine, go back to the reference point, check and process the focusing lens, calibrate the coaxiality of the beam nozzle, open the cutting auxiliary gas, and the pressure in the bottle should not be less than 1Mpa;
Sixth, check the guarantee gas of the external optical path of the laser cutting machine, the cold circuit cabinet, the cooling river, the air compressor, the cold dryer, and drain the accumulated water from the filter once a week.
