Machine is an AtomStack X7 Pro 10 watt diode laser. LightBurn version 1.2.00 using multi mode.
First a fill at 80% power and 150mm/s. Then a line to add detail (it works!). power and speed remained at the same settings. The latest burn file comes in at just under 2 hours at this configuration. Everything is a single pass.
The noises you hear are two exhaust fans and the diode laser head fan.
Wood finished off with a saturation and microfibre buffing with pure solid coconut oil (yes, it’s a thing). Using a nylon brush to gently make sure all the characters are free if any build up. Panel feels dry to the touch but has a much richer wood colour.
Feedback welcome. What could I have done better?
UCaLq_qrsRM2_qAXrJ1PIF0w
laser engraved
#Laser #Engraved #Panel #Art #AtomStack #Pro #Day
