3W and 5W are common equipment types for UV laser marking machines. 3W and 5W UV laser marking machines are constantly developing, but long-term use will also cause some damage, which is also a common problem of each machine. However, if we do well in maintenance, it will not be so easy to damage the machine. Therefore, in the process of machine application, if there are some common faults, we need to do some appropriate operation methods to maintain the machine.
Next, let’s talk about the maintenance of 3W and 5W UV laser marking machines. As industrial equipment and machinery, these are still essential. If the maintenance work is done well, the service life of the machine can be improved, and the failure of the machine in the normal working process can be reduced, so as to improve our work efficiency.
UV laser marking machine
First of all, when we use the machine, we must pay attention to whether the height of the sliding rail of the lifting machine on the workbench changes. If so, we must remember to adjust it to the correct height. In addition, we should clean the scene according to the correct method before use. It is recommended to clean with a small towel dipped with ethanol and wipe it in one direction. Secondly, it is the main box of the UV laser marking machine. The main box is a very important part and needs to be cleaned regularly. The manager can blow along the branch level. Remember, do not wash with water, because there is a circuit board inside, and it is not good if a short circuit is caused.
In addition, before we start the machine, we need to check whether our mobile phone settings have changed. We must follow the instructions and correct procedures for actual operation. During the operation of the equipment, the UV laser marking machine must pay attention to the damage of the power supply and wires. If this happens, we must avoid repairing the power supply and wires first, otherwise it will cause short circuit or even more serious disasters.
Then the server computer. Many people in this place neglect cleaning, but they often need cleaning. In the cleaning process, try to work with one hand to prevent the current and the body from generating a current circuit and causing damage to the body. Always check the condition of all accessories of the machine, including the operation of the display lamp and the thermal fan. If the equipment is found to be faulty, it must be handled in time.
The above is a little knowledge about the maintenance of 3W and 5W UV laser marking machines! I hope it will help you.
