In this video we tried to show how to make a stamp with the Wattsan CO2 laser machine. If this video was helpful and you want more, don’t forget to follow us and like our videos.
📌 Production of stamp on a Wattsan laser machine
✔️Let’s start by preparing the model.
✔️For this, you can use any vector program, for example CorelDraw.
✔️Please note that the cutting model must be mirrored.
✔️Next, import the model to the RDWorks program.
✔️Add an additional outline to change the way of engraving.
✔️Set up the engraving parameters for the red color.
✔️With the Reci W2 90W laser tube, we set the speed to 100 mm / s and the power to 25%.
✔️You can change the parameters both in the settings window and directly in the auxiliary window.
✔️Change the engraving speed to 200 mm / s.
✔️Set the parameters of the black color for cutting, set the speed to 15 mm / s and power to 80-85%.
✔️Set the air pressure for blowing in the range of 0.5-1 atmospheres.
✔️Adjust the focal length.
✔️Start engraving.
✔️Pay attention to the quality: the drawing must be clear, the edges must be not fused.
✔️When finished, remove any remaining plaque with a brush or compressed air.
✔️The stamp is ready!
————————————————–
To learn more how to choose a laser machine for your tasks or how to work with the other materials, please follow us.
If you need advice on laser or milling equipment, you can contact Wattsan.
❗For any questions please feel free to contact our customer support. It is there for you 24/7:
+8613153105797
infowattsan.com
————————————————–
📲 FOLLOW US
Facebook: https://facebook.com/cncwattsan
Instagram: https://instagram.com/wattsancnc
Pinterest: https://pinterest.com/wattsanlaser
UCmFeSsoTtHkkTg_4-09rQ-g
co2 laser
#Let39s #stamp #Wattsan #CO2 #laser #machine
