The CO2 laser marking machine uses a laser beam to mark permanent surfaces on various materials.
The role of the mark is to expose the deep material by evaporating the surface material, so as to carve beautiful patterns, trademarks, dates, logos or words.
At present, CO2 laser marking machine is mainly used in some occasions requiring higher accuracy.
Used in food, medicine, wine, electronic parts, integrated circuit (IC), electrical appliances, mobile communications, building materials, PVC pipes and other industries.
Applicable materials and industrial applications
CO2 laser marking machine can carve various non-metallic materials.
Used in garment accessories, pharmaceutical packaging, building ceramics, beverage packaging, cutting, rubber products, shell nameplates, craft gifts, electronic parts, leather, bamboo and wood products, label paper and other industries.
Typical application cases, such as laser marking of packaging boxes, paper marking and marking of metal detonator shells.
Introduction to CO2 laser marking machine
manual
Before opening the water, check the water circuit and the water circuit. The boot sequence is:
First, turn on the input power, and then turn on the key switch. At this time, the machine exhaust and refrigeration system are powered on, and the ammeter displays a value of about 7A;
Next, wait for 5 to 10 seconds, press the trigger button on the external control panel, and the ammeter will display a value of zero. After 3 to 5 seconds, the xenon lamp will light up, and the ammeter will display a value of 7A.
Third, turn on the galvanometer power.
Fourth, open the computer and call the required tag file;
Fifthly, adjust the laser power to the working current (10~18A) to start marking;
After marking, reverse the power supply of each component in the above order:
First, adjust the working current of the laser power supply to the minimum (about 7A);
Secondly, turn off the computer;
Third, turn off the galvo power.
Fourth, press the stop button;
Fifth, turn off the key switch;
Sixth, disconnect the input power.
