★ Do not place the laser marking machine equipment in a place with high humidity, dust or steam activities< This may cause fire or electric shock.>
★ Do not place the laser marking machine under high temperature, especially where the equipment is exposed to direct sunlight or close to the heater< This may result in fire or deterioration of the component or equipment appearance.>
★ Disconnect the power plug from the socket when transferring for protection< This may cause electric shock.>
★ Please disconnect the power plug when the equipment is not used for a long time< This may cause a fire>
★ Please remove the power cord and other cables when moving the device< This may result in equipment damage, fire, personal injury or electric shock.>
★ Before disconnecting the power cord and other cables, be sure to close the power supply< This may cause equipment damage or electric shock.>
★ Don’t hold the cable and hold the plug when disconnecting the power cord< This may cause fire or electric shock.>
★ Do not disconnect the power plug with wet hands< This may cause electric shock.>
★ Do not let the power cord close to the heater< This may cause fire or electric shock.>
★ Do not move the device while placing any objects on it< This may cause injury.>
★ Do not place any objects on the equipment< This may cause fire or electric shock.>
★ Do not close the ventilation hole< This may cause equipment damage or fire.>
★ Please turn off the power when cleaning the lens< This may cause injury.>
Install exhaust and air purifier. Some materials marked by laser may produce toxic smoke or particles, while dust in the equipment may cause problems or fire. Please close the power supply when cleaning the lens, otherwise it may cause harm to human body. Please do not put your hands in the laser marking area.
In addition, it is required to prepare protective glasses with an optical density of 5 or more and a wavelength of 1064 nm (note that the protective glasses will deteriorate with time, and it is recommended to replace them regularly). Do not modify, heat, apply excessive force to twist, distort or stretch, or place heavy objects on the optical fiber line of the optical fiber laser marking machine, which may cause damage to the optical fiber line. The specified small bending radius of the optical fiber cable is 150 mm or more, Twisting, kneading, stretching and heating of the optical fiber cable will not only cause problems, but also cannot maintain the performance of the instrument.
