Many customers will ask how many meters your laser cutting machine can cut in one minute when consulting the laser cutting machine? Indeed, as a highly efficient equipment, the cutting speed of laser cutting machine is naturally the focus of customers’ concern. But is it possible that the faster the laser cutting machine cuts the plates, the better? The high-energy laser will analyze this problem for you.
Analysis of cutting speed of laser cutting machine
1. When the laser cutting speed is too fast, the following adverse results will be caused:
① Unable to cut, sparks sprayed randomly;
② It causes the cutting surface to show oblique lines and the lower part to produce melting stains;
③ The whole section is relatively thick, but there is no melting stain;
2. On the contrary, when the laser cutting speed is too slow, it will cause:
① Causes over melting and rough cutting surface.
② The slit becomes wider and melts at the sharp corner.
③ It affects the cutting efficiency.
Therefore, in order to make the laser cutting machine better play its cutting function, we can judge whether the speed is appropriate from the laser cutting spark:
1. If the spark spreads from top to bottom, it indicates that the cutting speed is appropriate;
2. If the spark is tilted backward, it indicates that the feed speed is too fast;
3. If the sparks are not diffuse and few and agglomerate when cutting, it indicates that the cutting speed of the laser cutting machine is too slow and needs to be properly accelerated.
