The main components of the laser cutting machine are the circuit system, transmission system, cooling system, light source system and dust removal system. The main parts of daily maintenance are cooling system, dust removal system, optical system and transmission system. Next, we will introduce you to equipment maintenance skills.
1. Cooling system maintenance
The water in the water cooler needs to be replaced regularly, usually once a week. The quality and temperature of circulating water directly affect the service life of the laser tube. It is recommended to use purified or distilled water and control the water temperature below 35 ° C. It is easy to form scale without changing the water for a long time, thus blocking the waterway, so please change the water regularly.
2. Dust removal system maintenance
After a long time of use, the fan will accumulate a lot of dust, which will affect the exhaust and deodorization effect, and will also produce noise. If you find that the suction of the fan is insufficient and the smoke exhaust is not smooth, please turn off the power first, remove the dust from the air inlet and outlet of the fan, then turn the fan upside down, stir the internal blades until they are clean, and then install the fan. Fan maintenance cycle: about one month.
3. Optical system maintenance
After the machine works for a period of time, due to the working environment, the lens surface will be stuck with a layer of ash, which will reduce the reflectivity of the mirror and the transmittance of the lens. Finally, the work will be affected. At this time, please use cotton wool and ethanol to carefully wipe the edges along the center of the lens. The lens should be lightly wiped to avoid damaging the surface coating; The wiping process shall be handled gently to prevent falling; When installing the focusing lens, make sure that the concave side is downward.
The above are some basic machine maintenance measures. If you want to know more machine maintenance tips, please contact us.
