As an important part of the optical fiber laser cutting machine, it is very important to maintain the voltage stabilizer. During the use of the optical fiber laser cutting machine, we should often check the working state of the voltage stabilizer to prevent failures and ensure its normal operation, so as to ensure the normal cutting of the optical fiber laser cutting machine and improve the service life of the optical fiber laser cutting machine.
The operation engineer regularly checks the voltage regulator of the optical fiber laser cutting machine, mainly in the following aspects: 1. Observe the compensation transformer to see whether the temperature rise of the voltage regulating transformer is normal; 2. Whether there are overheating, coil discoloration and other phenomena; 3. Whether the contact of carbon brush is kept well; 4. Monitor whether the input and output voltages are normal and whether there is overload.
Of course, in order to carry out more strict maintenance, the operation engineer should clean the dust of each component of the optical fiber laser cutting machine voltage stabilizer every two months, check whether the chain drive system works normally, add lubricating oil to the sprocket, and adjust the tightness of the sprocket.
Finally, the operation engineer should also check whether the electrical contacts of the optical fiber laser cutting machine are damaged. If yes, they should be replaced in time. At the same time, they should check whether the column voltage regulating transformer operates flexibly and whether the carbon brushes are in good condition. They should replace the worn parts in time.
The above is a little knowledge about how to maintain the voltage regulator of the optical fiber laser cutting machine. It can be used as a reference for users, which is helpful to maintain the voltage regulator and extend the service life of the optical fiber laser cutting machine.
