In summer, it is very obvious that the temperature is high, and the high temperature will affect the use of the laser cutting machine to a certain extent. Therefore, in the summer, we must do a good job in the maintenance of the cutting machine equipment to avoid some external factors that have a bad influence on the equipment. So the following editor will talk about how to maintain the equipment in the summer.
- The temperature rises in summer, and the working pressure of the cooling system of the laser cutting machine increases. It is recommended to maintain the pressure of the cooling machine before the high temperature comes. The equipment pressure of different manufacturers is also different. It is recommended to consult the equipment manufacturer for specific parameters before maintenance.
- Make sure that the laser tube is filled with circulating water before the machine works. The quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, it is necessary to regularly replace the circulating water and clean the water tank. Try to do this once a week.
- There will be some mirrors and focusing mirrors on the laser cutting machine. The laser is reflected and focused by these mirrors and emitted from the laser head. The lens is easily stained with dust or other contaminants, resulting in loss of laser light or damage to the lens. So clean the lenses every day. When cleaning, pay attention to:
a. The lens should be wiped gently without damaging the surface coating;
b. The wiping process should be handled with care to prevent falling;
c. Be sure to keep the concave side down when installing the focusing lens. - Due to the high temperature in summer, the deterioration rate of cooling water will also be accelerated. It is recommended that laser cutting machine users use distilled water or pure water, and regularly clean the scale, so as not to cause the scale attached to the laser pipe to affect the laser power. Different types of cutting machines have different methods for cleaning scale, and they need to be operated under the guidance of the manufacturer.
- Since the dust of the laser cutting machine is mainly metal powder, it is recommended to regularly clean the dust in the electrical cabinet of the cutting machine and check the working condition of the cooling fan.
Therefore, when you maintain the laser cutting machine in the summer, you must pay attention to whether your maintenance method is correct and whether it is suitable for the current demand of the cutting machine equipment. At the same time, after the maintenance work of the cutting machine equipment is done, do not put it into work directly, first perform a test run test on it to avoid damage to the equipment during the maintenance process.
