In summer, with the temperature rising everywhere, many laser equipment will generate heat during use, which will cause some failures. Therefore, in order to avoid the failure of the laser cutting machine in summer, we must pay attention to the maintenance and repair of the laser cutting machine, which can extend the service life of the machine.
In the hot summer, the big picture laser warm reminder, whether it is going out to play, or outdoor work, heatstroke prevention measures should be done well. We should not only prepare for heatstroke prevention, but also maintain the laser cutting machine to prevent heatstroke
water-cooling
In high temperature weather, the deterioration rate of cooling water will also be accelerated. It is recommended that users of laser cutting machine use regular distilled water or pure water, and regularly clean the scale, so as not to cause the scale attached to the laser and the pipe to affect the laser power; Note that the temperature of cooling water should not be too different from the air temperature. As the temperature gets higher and higher in summer, the working pressure of the cooling system of the laser cutting machine increases dramatically. It is recommended to check and maintain the internal pressure of the cooler before the high temperature comes, and adjust it to adapt to the high temperature weather.
lubrication
Each guide rail shall be cleaned regularly to remove dust and other impurities to ensure the normal operation of the laser equipment. The rack shall be wiped frequently and lubricated. The time shall be adjusted to shorten the time by 0.5-1 times compared with the spring and autumn seasons, and the oil quality shall be observed. For machinery working in high temperature areas, the viscosity grade of the oil should be properly improved, and the temperature of the fat oil is easy to change, so as to ensure lubrication without impurities. Carefully check the straightness of the cutting table and rail of the laser cutting machine and the perpendicularity of the machine, and timely maintain and debug if abnormal. The guide rail shall be cleaned and lubricated frequently, and the motor shall also be cleaned and lubricated regularly to keep the machine in the best state at all times. The machine can move better during operation, cut more accurately, and the quality of the cut products will be higher.
line
Check and replace aging wires, plugs, rubber hoses and connectors; Check whether the pins of electrical components and parts are loose, and tighten them in time to avoid burning of electrical appliances and unstable signal transmission caused by poor contact.
reminder
Note: Be careful of the laser machine frosting. Due to the large difference between the temperature of the chiller and the ambient temperature, the laser and the cutting head will frosting, which will cause damage to the equipment and lenses. Please adjust the temperature of the chiller. If not, please contact the after-sales service personnel to ask how to adjust it.
No matter how powerful the machine is, it needs to be maintained. So when the hot summer comes, protect your “love machine” and always be in the best condition to bring you greater benefits.
