As one of the modern high-tech and intelligent equipment, the optical fiber laser cutting machine is a high-value and durable product, and also a powerful assistant for sheet metal processing. The quality of a optical fiber laser cutting machine directly affects the production cost and work efficiency of the manufacturer. The optical fiber laser cutting machine with excellent performance helps to improve the production efficiency of the manufacturer and reduce the production cost, and vice versa. But at the same time, the optical fiber laser cutting machine, like other products, also suffers from birth and death. In the process of processing and production, it is facing aging problems over time. What measures should we take to delay the aging of the optical fiber laser cutting machine?
1. Maintain the fiber laser
As the most important part of the fiber laser cutting machine, the quality of the fiber laser directly affects the performance of the machine. As the gas station of the laser cutting machine, the fiber laser is full of power. The bad laser directly leads to the poor cutting effect of the laser cutting machine. Therefore, the maintenance of the fiber laser to prevent premature aging is the top priority. In the process of operating the laser cutting machine, we should not use it all the time. It should be overloaded. We should measure the laser according to our ability. Generally, it is feasible to use less than 90% of the laser, which can effectively delay the aging of the fiber laser.
2. Working environment of optical fiber laser cutting machine
Users should pay special attention to the working environment when using the fiber laser cutting machine. For example, in the case of high temperature and dust, regular cleaning is required, and time should be taken to pay attention to the temperature changes of the laser and water chiller. The laser temperature should not be too high, which may cause light problems. At the same time, too much solid dust will cause friction between equipment parts, which will damage the machine over time, thus affecting the cutting accuracy, and lead to premature aging of equipment in the long run.
The aging of optical fiber laser cutting machine is a normal phenomenon just like other durable products. What we can do is to do a good job of protection, maintain the machine and equipment, and avoid premature aging of optical fiber laser cutting machine caused by environmental and human factors. In this way, we can extend the service life of the laser cutting machine, better serve users, and create value for users.
