1. Size of laser coagulation of laser cutting machine
After gathering, if the light spot is very small, the cutting accuracy is very high. If the gap after cutting is also very small. It shows that the precision of laser cutting machine is very high, and the quality is very high. But the laser beam is tapered, so the slit is also tapered. Under this condition, the greater the thickness of the workpiece, the lower the accuracy, so the larger the kerf.
2. Accuracy of workbench
If the accuracy of the workbench is very high, the cutting accuracy will also be improved. Therefore, the accuracy of the workbench is also a very important factor to measure the accuracy of the laser generator.
3. The laser beam of the laser cutting machine is condensed into a cone
When cutting, the beam is tapered downward. If the thickness of the cutting workpiece is very large, the cutting accuracy will be reduced, and the gap will be very large.
4. Different cutting materials
It will also affect the accuracy of the laser cutting machine. In the same case, the accuracy of stainless steel cutting and aluminum cutting will be very different, and the stainless steel cutting accuracy will be higher, and the cut surface will be smoother.
These are the four major factors that affect the cutting accuracy of the laser cutting machine
