During the use of the laser cutting machine, various problems often occur due to long continuous use time, heavy dust in the working environment, improper operation by the operator, etc. So how to deal with such problems? Let’s take a look at them together.
1. Unable to connect the device: whether the computer is equipped with a driver, whether the USB cable or the network cable is plugged in, check whether the USB cable or the network cable is damaged, and whether the adapter is rusted;
2. No display on the panel after startup: check whether the startup switch is damaged, whether the switching power supply is normal, and then check whether the display panel is damaged or whether the line socket is aging;
3. Graphic deformation and cutting overlap during cutting: check whether the guide rail is loose, whether the motor is damaged, whether the voltage is stable, and whether the machine system settings are changed;
4. The equipment can not be started or will trip when the switch is opened: check whether the emergency stop switch is pressed, whether the external power supply is connected, whether the outside world hears an abnormal snap sound, and whether the circuit is broken, which will trip.
5. High voltage line is on fire: pay attention to this problem. The line may be used for a long time. It is recommended to cover the high-voltage insulating sleeve on the outside of the high-voltage line. In this case, power off the operation.
6. The size of the cut figure is too large or too small: check whether the platform is flat and whether the materials have been paved, so open the air suction during the cutting process to absorb the materials to be straight;
7. No light during cutting: first, check whether the light emitting switch is broken, whether the chiller is turned on and whether the return water is normal. Because many of them are equipped with protective devices, no light can be emitted without cooling water;
8. When cutting, the guide rail does not rotate or moves weakly: check whether there is a problem with the motor and the driver, and observe whether the bearing is rusted or blocked by foreign matters.
The laser cutting machine may also have various other problems in daily use, and will continue to update this aspect for everyone in the future.
