Optical fiber cutting machine has been adopted by more and more production enterprises. This kind of machine and equipment has excellent performance parameters and can be used to cut stainless steel materials or carbon steel materials, of course, it can also be used to cut other types of materials. When purchasing this kind of machine and equipment, customers should consider the performance parameters of the machine and equipment itself, and make flexible choices based on their actual cutting needs. Here is a brief introduction to the performance parameters of this kind of machine and equipment.
The first important performance parameter of the optical fiber cutting machine is the laser wavelength. At present, the mainstream laser wavelength used by this machine is 1080nm, which will play a good role in cutting. The aiming and positioning device adopted by this machine is a red light indicating system. This red light indicating function can make the aiming and positioning more accurate. In terms of power, the power of this machine can be between 300 and 1000 watts. Customers can flexibly choose the power according to their actual needs. Effective processing format is a very important performance parameter index in this machine. This machine can process 1500x3000mm format or 2000x4000mm format. It can be said that the processing area is very large and can be used by most production and processing enterprises. The accuracy of this machine is very high after the reset of the x and y axes, and the error is between plus and minus 0.03 mm. The maximum speed during processing can reach 0.6g, and the maximum cutting thickness will vary according to different materials. If stainless steel materials are cut, the maximum cutting thickness is 5mm, and if carbon steel materials are cut, the maximum processing thickness is 10mm. This kind of machine equipment can support a variety of graphic formats, such as bmp or plt graphic formats. In addition, drawings of common cad software and coredraw software can also be supported. The user can use these tool software to design drawings and then perform cutting.
There are also several very important parameters and performances of the optical fiber cutting machine. The first is the requirements for power supply. This equipment uses a three-phase four wire AC 380 V power supply, with a current of 60 mA and a frequency of 50 Hz. Customers should pay attention to the parameter performance when purchasing this machine, and select the cutting equipment that meets the parameter conditions according to their actual cutting operation.
