There are four aspects when using the laser marking machine, which should be paid special attention to. If you do not pay attention to these four aspects, the machine and equipment may be directly damaged, or the printing effect may be very bad. The first thing to pay attention to is the daily maintenance. There are many factors to be considered during the daily maintenance, such as avoiding vibration during the operation of the machine itself and moving the machine during operation. Therefore, the operator should be careful when operating. If it is necessary to move the machine, the machine should be shut down first. In addition, if there is a problem in the machine, the machine should be turned off at this time, and then professional technicians should handle the problem. Direct operators are not allowed to disassemble the machine.
Portable laser marking machine
The second problem to be noticed when using the laser marking machine is the environmental requirements. This machine has its own operating temperature requirements. Of course, different models of machines have different temperature requirements. Therefore, you should read the instructions carefully before using this machine, and use the machine according to the temperature range specified in the instructions, There are also relevant requirements for humidity when the machine is running, and the machine must be used in a clean and dust-free state, so the machine must be used according to such environmental requirements, otherwise problems may occur in the use process. The third thing to pay attention to is the overall maintenance of the machine. During the maintenance, many aspects should be taken into consideration, such as the cooling water problem, the cleanness of the workbench, and the regular maintenance of the power supply. Simple maintenance should be carried out before each startup and before each off duty. The fourth problem to be noted is that you must master some simple troubleshooting methods. For example, when the workbench does not work, you should check whether the power supply is connected and whether the transmission lines are connected.
Four important problems in the use of the laser marking machine are simply introduced here. Generally speaking, once the machine is running, it will take a long time. Therefore, a long time of operation may also lead to some failures of the machine. Therefore, the operator should master simple troubleshooting methods.
