Blog

Blog

Why is the laser marking machine sometimes very shallow and unclear?

Laser marking is to mark the surface of different materials permanently with laser beam. The effect of the marking is to expose the deep layer material by evaporation of the surface material, or to cause chemical and physical changes of the surface material by light, or to display the desired etching pattern and text by […]

Gasket laser cutting machine

Gasket refers to stamping or cutting with metal or non-metal materials and cutting into specific shapes to reduce pressure and increase friction, sealing, shock absorption, fixation and other effects. The gasket has been widely used in daily life, such as sealing gasket in common medicine and shock-absorbing gasket in cosmetics. Common sealing gaskets include paper […]

Application and advantages of optical fiber laser marking machine in automobile parts

In recent years, advanced technologies such as laser processing, industrial robots and digital control have continuously promoted the upgrading of the automobile manufacturing industry. As an advanced processing method, laser will bring a revolutionary breakthrough for the development of automobile manufacturing industry.With the promulgation of national automobile safety laws and regulations, higher requirements are put […]

Reasons for proofing before selecting laser marking equipment

Now laser marking equipment has many applications, so many friends need to buy laser marking equipment, but many laser marking equipment manufacturers usually require customers to make samples in advance. Why? Today, I will introduce in detail the reasons for proofing before selecting laser marking equipment.Proofing refers to installing the workpiece to be marked on […]

Five common mistakes in laser engraving and their avoiding methods

Whether you are an accomplished engineer or a novice manufacturer, learning the correct use of design equipment can avoid possible problems and errors and save time and energy. The problems that arise from time to time make designers do not know what they have done wrong or how to do better. This is true in […]

CO2 Paper Laser Cutting Machine

Paper converting processes typically run at very high speeds, with roll-to-roll laser cutters sometimes reaching speeds as high as 400m/min. Laser cutting achieves the cutting effect by vaporizing the surface of the paper, so the paper and card materials respond well to the carbon dioxide (CO2) laser wavelength range, the cutting process is fast and […]

Comparison and performance characteristics of four laser cutting machines

Fiber laser cutting machine, the principle of fiber laser cutting is through the transmission of optical fiber, the flexibility of the laser has been significantly improved, and there are fewer fault points, fast speed and convenient maintenance. It performs amazingly when cutting thin plates of about 3mm, which has a great advantage. However, due to […]

What is the difference between picosecond, femtosecond and nanosecond laser cutting applications?

Nanosecond, picosecond, femtosecond are time units, 1 second = 103 milliseconds = 106 microseconds = 109 nanoseconds = 1012 picoseconds = 1015 femtoseconds, picosecond laser cutting machine, nanosecond laser cutting machine refers to picosecond laser The single pulse time refers to the pulse width of the laser. The laser treatment method is to use a […]

Are UV lasers really better than CO2 and fiber lasers?

We all know that the use of lasers is very broad, and it can be cut, welded, and marked. The precision of the laser is high, and it is deeply loved by users. But did you know which one is better with a different laser? Such as commonly used ultraviolet laser, fiber laser and carbon […]

Product added!
The product is already in the wishlist!

Shopping cart

close