One of the cutting processes of laser cutting machines is cutting perforation technology, and there are currently two processing methods for this technology: blast perforation and pulse perforation. The effects of different cutting and perforating methods are also different. Therefore, before operating the cutting machine for perforation processing, it is necessary to fully understand these […]
After the laser cutting machine is installed, it cannot be put into use immediately, and related trial running tests and adjustments are also required. Because many people are anxious to put it into use after installation, the accuracy of the cutting machine equipment is not adjusted well, resulting in failure and poor cutting. So the […]
Laser marking machines use a laser beam to mark permanent surfaces on a variety of different materials. The effect of the mark is to expose the underlying material through the evaporation of the surface material, thereby carving out beautiful patterns, logos and words. At present, the marking machines used in the market are mainly divided […]
The Redsail UV laser marking machine is developed with a 355nm UV laser. Compared with the infrared laser, the machine adopts the third-order intracavity frequency doubling technology. Compared with the infrared laser, the focused spot of the 355 UV light is very small, and the marking effect is directly interrupted by the short-wavelength laser. The […]
Once it is found that the cutting quality of the laser cutting machine is not up to standard, it is very likely that there is an error in the operation of the equipment, resulting in substandard cutting quality. Therefore, when it is found that there is an error in the cutting machine equipment, it must […]
In summer, it is very obvious that the temperature is high, and the high temperature will affect the use of the laser cutting machine to a certain extent. Therefore, in the summer, we must do a good job in the maintenance of the cutting machine equipment to avoid some external factors that have a bad […]
“The carbon dioxide (CO2) laser was introduced in the early 1990’s for facial resurfacing. It is used for facial wrinkles, acne scarring and uneven skin pigmentation. The carbon dioxide laser is still considered the gold standard for the most severe wrinkling and scarring. However, Dr. Williams admits has been using this less frequently in his […]
After a long time of use, the laser cutting machine will inevitably have some loss. Once the loss is too heavy, it will affect the service life and use effect of the equipment parts, which will indirectly lead to the poor cutting quality of the cutting machine equipment. So in the face of this situation, […]
Add an individual touch to glasses, bottles and mirrors by engraving them with texts, logos and images. Using a laser for etching glass leads to an aesthetic matte effect. Also check out how to use a rotary attachment for engraving conical objects. For more details on glass engraving with a Trotec laser check out our […]
This week we’re talking with @George Brown College Fashion Exchange in Toronto, ON on how they create large format direct-to-print and laser cut fabrics in their fashion design program. They use the SP500 large format laser cutter with the JobControl Vision Camera System to read registration marks printed with their wide format printers directly on […]
