Blog

When the optical fiber laser cutting machine is cutting carbon steel materials, due to the high hardness of carbon steel, in order to avoid problems, the optical fiber equipment should be checked and maintained frequently. If there are problems during processing, it is necessary to check all aspects of the fiber laser cutting machine. Under […]

Optical fiber laser cutting machine has won the trust of many metal processing enterprises with its irreplaceable processing advantages. However, although the efficiency of optical fiber laser cutting machine is very high, after a period of use, there will be some errors in the cutting accuracy, and the processed products may not achieve the desired […]

The metal laser cutting machine will generate a lot of heat when processing sheet metal. Normally, the heat generated by cutting will spread to the processed sheet metal along the cutting seam and be fully cooled. In the process of metal laser cutting machine, the outer side of the hole can be fully cooled, while […]

The quality of laser cutting machine mainly depends on its cutting quality, which is the most direct method to check the quality of laser cutting machine equipment. For new customers, when purchasing equipment, they will ask to check the laser cutting machine proofing first. In addition to the cutting speed of the equipment, proofing also […]

Any kind of thermal cutting technology, except in a few cases, can start from the edge of the plate, generally it is to pierce a small hole on the plate. In the early days, the laser punching compound machine first punched a hole, and then used the laser to cut from the hole. With the […]

In summer, with the temperature rising everywhere, many laser equipment will generate heat during use, which will cause some failures. Therefore, in order to avoid the failure of the laser cutting machine in summer, we must pay attention to the maintenance and repair of the laser cutting machine, which can extend the service life of […]

Laser cutting is mainly conducted in the form of heat conduction. It can also cut through thick plates in the actual cutting process. However, the greater the thickness, the greater the heat loss, which leads to the reduction of cutting speed and affects the processing efficiency. 1： There are many slags at the bottom of […]

In daily production, no matter what industry, as long as machines and equipment can be used, aging will occur during long working hours, and even frequent failures will occur. As a high-tech product, laser cutting machine is no exception. Among the components of the laser cutting machine, the laser is vulnerable to aging. There are […]