With the rapid growth of production and consumption of China’s metal industry, sheet metal processing technology has also been developed rapidly, especially the advent of laser cutting machine, which has brought unprecedented leap for sheet metal processing.
How to adjust the laser cutting machine to make it cut faster and better?
In fact, both machines and personnel need regular maintenance to maintain relatively good operating conditions. In fact, there are many ways to adjust the slow cutting or poor cutting of the machine. Today’s editor will introduce several methods to improve the cutting effect and speed of laser cutting machine.
First, adjust the parameters of the laser machine to improve the cutting speed.
How to adjust the laser cutting machine
Machine parameter setting is one of the main reasons that affect the cutting speed of the machine. Generally, if the parameters are not adjusted properly, the cutting speed will be poor. Parameters are like actions related to a series of actions (such as driving, starting, accelerating, etc.). If the parameter settings are incorrect, just like when the car starts, it will shake when you shift to the second gear. Start.
When adjusting this parameter, pay attention to the following points:
1. Initial speed: As the name implies, this setting is the starting speed of the machine, such as the starting speed of the car during driving. Many customers mistakenly believe that the greater the initial speed, the better, but in fact this is wrong. If the initial speed of the laser machine is set too high, the machine jitter will be very large.
2. Acceleration: acceleration refers to the speed of fuel valve during driving. This is the time from the initial speed to the normal cutting of the machine. When the machine cuts different patterns, it is a process of continuous starting, stopping and stopping. If the acceleration is set too low, the cutting will slow down.
Secondly, adjust the machine assembly to improve the cutting effect.
1. Installation of guide rail: the installation of guide rail shall be parallel. If the installation is not parallel, there will be resistance when the machine is running. If it gets stuck when walking, there will be sawtooth when cutting. Therefore, only two parallel lines can be installed on the two Y direction rails, and there should be no error between them.
2. The installation position of cross beam and coupling is not good. When installing the machine beam and coupling, the screws are not locked, or the locking is inclined.
Therefore, in the daily use of the laser cutting machine, the precautions must not be ignored, and the laser cutting machine should also be maintained regularly, so that the equipment can run for a longer time.

After using the laser cutting machine, many bosses know that it has many performance and advantages, and the processing effect is relatively high, which generally won’t disappoint users. However, for some people who do not purchase or use metal laser cutting machines, it is unclear what the advantages of laser cutting machines are. Next, I will introduce to you.
What are the performance advantages of metal laser cutting machine?
What are the performance advantages of metal laser cutting machine?
1. Advanced cutting technology
In the cutting process, the laser will emit countless high-performance and high-energy laser rays. The huge energy generated by these laser beams can instantly evaporate and cut the surface, so very hard interfaces can be easily removed.
At present, this process is also the most advanced cutting process, which is incomparable to other cutting processes. This cutting process is very fast in the cutting process, which can easily cut thick steel plates instantly, and the cutting accuracy is also very accurate. The cutting section accuracy can reach several millimeters, which can completely meet some high cutting requirements.
2. Simple mechanical operation
In the process of using the laser cutting machine, all information transmission and energy transmission are transmitted through optical fiber. The biggest advantage of transmission in this way is that it saves a lot of manpower and material resources, and there is no optical path leakage in the transmission process. Moreover, before using the device, the energy can be easily transferred to the laser without any adjustment of the optical path.
3. Stable cutting performance
In the cutting process, this laser cutting machine uses the best laser in China. The service life of the laser is as long as several years. In the process of use, except for human factors, there is almost no system failure. Therefore, the laser cutting machine will not produce any vibration, pressure or other adverse effects under long-term operation.

When the laser cutting machine is working, it needs high temperature stability. This temperature is not the temperature of the external environment, but the internal temperature of the laser cutting machine (including the laser and cutting head). Laser cutting machine is a high-tech product invented under the premise of rapid industrial development, but many operators of operating equipment will find that the water temperature of the laser cutting machine sometimes rises too fast, and water plays a key role in the laser cutting machine. So, what is the main reason for the rise of the water temperature of the laser cutting machine?
What is the reason for the temperature rise of the laser cutting machine?
1. When the metal laser cutting machine is working, the ambient temperature is high.
2. The continuous working time of metal laser cutting machine is too long, so it should be properly closed and rested.
3. The water inlet pipe and outlet pipe of the water pump are too dirty, the water protection device is blocked, and the water flow is not smooth.
4. The working light intensity of metal laser cutting machine is too high.
5. The return of the cooling water outlet pipe is abnormal, resulting in poor water flow.
What is the reason for the rising water temperature of the laser cutting machine?
How to solve the problem of high water temperature of laser cutting machine?
In the working process of the laser cutting machine, a large amount of water is needed to cool the high temperature inside the laser tube to ensure the normal use and service life of the laser tube. However, when the laser cutting machine is used normally, the water in the cooling water tank is prone to high temperature, especially in summer, which will become hot in less than 2 hours. If it is not replaced in time, the power of the laser tube will be greatly reduced. Chuyu Laser teaches you how to deal with the headache of high water temperature of the laser cutting machine.
You can find another common bucket. Two double headed ones are required. When the bucket is filled with cold water, you can start to work. When the water temperature is high, take out the working water pump from the bucket with high water temperature and put it into another cold water bucket to continue working. When the water temperature in the bucket is high, the water in the other bucket has been basically cooled to cold water. Then put the water pump into the barrel, and the problem of high water temperature of the laser cutting machine can be solved without paying for repeated replacement. If you think it is troublesome and you need to stop and replace the water pump to affect production, you can purchase a special laser cooling water tank, a refrigerator with a compressor, which can cool the high-temperature water in operation to the set temperature.
With the improvement of laser power and the application of linear motor, laser cutting machine is developing rapidly. The increase of laser power means that not only thicker steel plates can be processed, but also the feed speed can be improved. There is no doubt about the importance of laser processing. As a powerful supplement to traditional machining methods, it solves some problems faced by traditional machining.
The above is the reason for the rise of the water temperature of the laser cutting machine, so the operator should also pay attention to the abnormal conditions during the subsequent operation. If the operator does not follow the correct operation method, the water temperature may rise rapidly, affecting the treatment progress.

In recent years, the mold industry has been developing rapidly, relying on traditional processing methods for production, but the traditional processing methods are far from meeting the existing development situation, so transformation and development is imperative. The advantages of laser cutting machine in mold industry have been gradually proved.
In China, most mold processing equipment is imported from abroad, and the proportion of enterprise investment and growth is large. The annual demand for mold processing equipment is more than 10 billion yuan. The demand for equipment of mold enterprises is long-term, which is also a huge business opportunity for laser equipment.
At present, the level of mold production equipment in China is generally low, and there is great room for improvement. Mold processing covers a wide range of industries, providing spare parts for automobiles, instruments, household appliances and other industries. Mold processing occupies 60% of the market share in the mold market, which also means that laser cutting machines have potential in the mold industry. There is still a lot of cake waiting for the laser cutter to seize the landing potential.
With the continuous progress of laser technology, the application of laser technology is more and more extensive, showing a good trend in the future development trend. In the mold processing industry, laser cutting technology has also been applied, and this trend is rising,
In the future mold industry market, the development trend of large and multi type parts is proposed. In addition, the stability and reliability of materials for molds are getting higher and higher, and the requirements for inheritance and high precision of mold equipment are higher. These are the shortcomings of existing mold equipment, and the advantages of laser cutting equipment and laser cutting equipment. There is almost no requirement for the material, material type and size of the workpiece, and the workpiece can be cut with good beam quality. Relatively speaking, the processing cost is low, the stability is high, and maintenance is not required. Of course, in some aspects, the laser cutting machine is also subject to certain conditions relative to the mold industry.
What role does the laser cutting machine play in the mold industry?
CNC laser cutting machine is very excellent in the mold industry and is loved by mold enterprises. It is mainly used for large and medium-sized precision plastic molds, small and medium-sized precision molds and other precision molds. Next, I will introduce to you:
1. Large and medium-sized precision plastic mold
According to statistics, the market share of molds in China is 61%. Large and medium-sized precision plastic molds cut by laser cutting machines are mainly used in automobile, household appliances and other industries, which promote the development of mold industry.
2. Small and medium-sized precision molds
The application of small and medium-sized precision molds is mainly in the high-speed development of electromechanical industry, manufacturing industry and information industry. This is because it uses a laser cutting machine for cutting. The quality is very good, and there are many kinds, which can meet the needs of different consumers.
3. Other precision molds
In recent years, magnesium aluminum alloy has been widely used in the market, which also drives the development of laser cutting machine industry. Many consumers use a large number of laser cutting machines, and the precision molds obtained by using laser cutting machines are mainly used in the construction industry.
In general, the development space of laser cutting machine in mold processing industry is very large.