1. It is recommended that the customer buy a temperature and humidity meter and place it in the fiber laser air conditioning room to monitor the temperature and humidity in the air conditioning room
2. The customer understands the environmental requirements of the fiber laser according to the following table of ambient temperature and ambient relative humidity. The laser low-temperature water is set at 22 ℃, and the laser cutting machine ambient temperature (air conditioning room temperature) is below 26 ℃. Then the laser ambient relative humidity (air conditioning room relative humidity) should be guaranteed to be below 75%. If the laser ambient relative humidity (air conditioning room relative humidity) exceeds 75%, for example, 85%, Then the ambient temperature of the laser (temperature of the air conditioning room) should be adjusted below 24 ℃, otherwise there is a risk of condensation inside the laser. If the value corresponding to the intersection of the laser ambient temperature (air conditioning room temperature) and the laser ambient relative humidity (air conditioning room relative humidity) is lower than 22, there will be no condensation inside the laser. If it is higher than 22, there is a risk of condensation inside the laser. Customers can improve it by lowering the laser ambient temperature (air conditioning room temperature) and the laser ambient relative humidity (air conditioning room relative humidity). Or set the cooling and dehumidification functions of the air conditioner to keep the ambient temperature of the laser no more than 26 ℃ and the ambient relative humidity less than 60%. It is suggested that the customer should pay attention to recording the value of the temperature and humidity meter every shift, so as to find problems in time and prevent risks.
