The safety operation rules of the laser cutting machine must be strictly observed. Start the laser strictly according to the laser startup procedure. The operator must be trained, familiar with the equipment structure and performance, and master the knowledge about the operating system. Wear labor protection articles as required, and wear protective glasses that meet the requirements near the laser beam. Before knowing whether a material can be irradiated or heated by laser, do not process it to avoid the potential danger of smoke and vapor. When the equipment is started, the operator shall not leave the post or entrust others to be in charge without authorization. If it is really necessary to leave, the machine shall be shut down or the power switch shall be cut off. Keep the fire extinguisher within easy reach.
Turn off the laser or shutter when not processing; Do not place paper, cloth or other flammable materials near the unprotected laser beam. In case of any abnormality during processing, stop the machine immediately, eliminate the fault or report to the supervisor. Keep the laser, bed and surrounding area clean, orderly and free of oil stain, and stack workpieces, plates and waste materials as required. When using gas cylinders, avoid crushing welding wires to avoid electric leakage accidents. The use and transportation of gas cylinders shall comply with the gas cylinder supervision regulations. Gas cylinders shall not be exposed to the sun or close to heat sources. When opening the bottle valve, the operator must stand at the side of the bottle mouth. High voltage safety regulations shall be observed during maintenance. The maintenance shall be carried out every 40 hours of operation or every week, every 1000 hours of operation or every six months according to the regulations and procedures.
The above precautions should be paid attention to in the operation of the laser cutting machine. As long as we pay more attention to these details in our daily work, we can ensure our own safety.
